AiP74LVC157

The AiP74LV08 provides a quad 2-input AND function.

The AiP74LVC08 provides four 2-input AND gates. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LV14 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC14 and AiP74HCT14. The AiP74LV14 provides six inverting buffers with Schmitt-trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals. The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.

The AiP74LVC14 provides six inverting buffers with Schmitt trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in mixed 3.3V and 5V applications.

The AiP74LVC17 provides six non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in mixed 3.3V and 5V applications.

The dual 4-input positive-AND gate is designed for 2V to 5.5V VCC operation.

The AiP74LV32 is a low-voltage CMOS device that is pin and function compatible with AiP74HC32 and AiP74HCT32. The AiP74LV32 provides a quad 2-input OR function.

The AiP74LVC32 provides four 2-input OR gates.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC74 is a dual edge triggered D-type flip-flop with individual data (nD) inputs, clock (nCP) inputs, set (nS(—)D) and (nR(—)D) inputs, and complementary nQ and nQ(—) outputs.The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the nQ output on the LOW-to-HIGH transition of the clock pulse. The nD inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition, for predictable operation.Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.

The AiP74LV125 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC125 and AiP74HCT125. The AiP74LV125 provides four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE—). A HIGH at nOE—causes the outputs to assume a high-impedance OFF-state

The AiP74LVC125 consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE(—)). A HIGH at nOE(—)causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs.

The AiP74LV126 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC/HCT126. The AiP74LV126 consists of four non-inverting buffers/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high impedance OFF-state.

The AiP74LVC126 consists of four non-inverting buffers/line drivers with 3-state outputs, which are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high-impedance OFF-state.Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs.

The AiP74LVC132 provides four 2-input NAND gates with Schmitt trigger inputs. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V environment.

The AiP74LVC138 is a 3-to-8 line decoder/demultiplexer. It accepts three binary weighted address inputs (A0, A1 and A2) and, when enabled, provides eight mutually exclusive outputs (Y(—)0 to Y(—)7) that are LOW when selected.There are three enable inputs: two active LOW (E(—)1 and E(—)2) and one active HIGH (E3). Every output will be HIGH unless E(—)1 and E(—)2 are LOW and E3 is HIGH.This multiple enable function allows easy parallel expansion of the device to a 1-of-32 (5 lines to 32 lines) decoder with just four AiP74LVC138 devices and one inverter. The AiP74LVC138 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Unused enable inputs must be permanently tied to their appropriate active HIGH or LOW state.

The AiP74LVC139 is a dual 2-to-4 line decoder/demultiplexer.. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

IC AiP74HC/HCT21 cung cấp chức năng AND 4 đầu vào. Các đầu vào bao gồm các điốt kẹp. Điều này cho phép sử dụng các điện trở giới hạn dòng điện để kết nối các đầu vào với điện áp vượt quá VCC.

The AiP74LVC157 is a quad 2-input multiplexer which select four bits of data from two sources under the control of a common select input (S). The four outputs present the selected data in the true (non-inverted) form. The enable input (E(—)) is active LOW. When pin E(—) is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all the other input conditions. Moving the data from two groups of registers to four common output buses is a common use of the AiP74LVC157. The state of the common data select input (S) determines the particular register from which the data comes. It can also be used as function generator.It is useful for implementing highly irregular logic by generating any 4 of the 16 different functions of two variables with one variable common.The device is the logic implementation of a 4-pole, 2-position switch, where the position of the switch is determined by the logic levels applied to pin S.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.